Home › Shop › Amine Absorption and Regeneration Performance
Excel tool

Amine Absorption and Regeneration Performance

Acid gas pick-up, rich loading, circulation, reboiler duty, steam ratio, reflux and solvent condition for amine units.

Performance monitoring of an amine acid-gas removal unit from routine plant data: enter the sour gas flow and its H2S and CO2 content, the treated gas analysis, the amine type, strength, circulation and loadings, the absorber and regenerator temperatures and pressures and the reboiler steam, and see the acid gas pick-up, the rich loading against your limit, the circulation you need, the reboiler duty per unit of acid gas, the steam ratio, the reflux ratio and the lean/rich exchanger performance.

USD 49 one-time purchase

  • Excel workbook (.xlsx), no macros, version v1.0
  • Excel 2010 or later, Windows and Mac
  • Instant download after payment; updates to this major version included
  • Single-user licence; team and site options
  • Refund if it does not work as described or has an error we cannot fix: contact support within 14 days of purchase — full refund policy
Amine Absorption and Regeneration Performance — sample pages

What it does

Acid gas pick-up

mole balance on the gas for H2S and CO2, removal percent, treated gas flow, acid gas mass to the regenerator overhead, and the margin to your treated gas specification.

Rich loading from the

Rich loading from the gas-side balance, compared with your own limit; the circulation required for the target rich loading and the margin of the present circulation; a balance check against laboratory rich loading.

Amine types as generic

Amine types as generic chemistry (MEA, DEA, MDEA, DGA-type) with default molar mass and a check of the solution strength against the usual range; your own molar mass for blends.

Absorber heat balance

heat of reaction released (your heats of reaction), heat carried out by the gas, the rich amine temperature, and an upper estimate of the temperature bulge.

Reflux ratio from the

Reflux ratio from the regenerator top temperature and pressure, or from the measured reflux flow; reflux water flow and overhead condenser duty; a heat balance check of the regenerator.

Lean/rich exchanger

duty, lean outlet temperature, hot-end and cold-end approach, log-mean temperature difference, UA and, with the area, the overall coefficient against a published typical range; lean cooler duty.

Built for engineers

  • Visible formulas — nothing hidden, so you can check every step.
  • Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
  • Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
  • Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.

For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.

Preview the workbook

An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].

Amine Absorption and Regeneration Performance Excel workbook sample pages
Layout illustration (not a results screenshot).

Specification and checks

FormatExcel workbook (.xlsx), no macros
Versionv1.0
Works inExcel 2010 or later, Windows and Mac
UnitsSI, US and British, mixed freely
IncludesGuide tab with method and references, calculator, print-ready report
Checked againstChecked against an independent Python model (IAPWS-IF97 properties from a separate library) in 205 recalculated runs: all 16 selector combinations, SI, US, British and industry units on three cases, result-unit switching, 48 valid edge cases and 123 invalid-input cases; about 5,100 values compared, 0 mismatches, 0 formula errors in LibreOffice.
Free versionBrowse the free calculators

Compatibility, licence and support

FileExcel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise.
LicenceSingle user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms.
UpdatesUpdates to this major version are included; download them again from the link in your receipt.
SupportEmail [email protected] with your order number — questions on the method, your inputs or your results are welcome.
RefundsIf the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy.