Thermal evaluation of a generic high-pressure carbamate condenser in a urea synthesis loop, built on textbook thermodynamics and heat-exchanger methods only: enter the ammonia, CO2, water vapour and inert feeds, the process temperatures and pressure, the share of the CO2 condensed to carbamate and of the free ammonia and water condensed, your heats of formation and condensation, any liquid feed, the low-pressure steam pressure, feedwater temperature, blowdown and steam flow, the design U and the installed area.
USD 49 one-time purchase

What it does
Condensation balance
N/C and H/C ratios, CO2 condensed, ammonia bound and free, carbamate leaving, water condensed, optional urea formed in the condenser, vapour and liquid leaving, inert share and partial pressure.
Heat released, term by term
carbamate formation, free ammonia condensation or absorption, water condensation (IAPWS-IF97 latent heat), gas cooling, liquid feed heating, urea formation and heat loss.
Steam side
steam raised from the heat balance, or the measured steam flow with the heat balance closure; feedwater, blowdown and steam per tonne of CO2.
Heat transfer
LMTD with a constant boiling temperature, or your own effective process temperature; approach at the outlet; UA.
Rating
actual U against the design U, cleanliness factor and fouling resistance, compared with the treated feedwater fouling allowance. Design: the area required at your design U.
Condensation degree against the
Condensation degree against the N/C ratio from your own table (up to 8 points), with the shortfall flagged.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model (IAPWS-IF97 properties from a separate library) in LibreOffice: all selector combinations, SI, US, British and industry units, result-unit switching, valid edge cases and invalid inputs, with 0 formula errors. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |