Centrifugal Pump Performance Evaluation
Is your pump still on its curve, and does it have enough NPSH margin? Site readings come at a different speed, impeller trim and liquid from the curve, so the raw numbers cannot be compared directly.
Pump readings turned into head, power, efficiency and NPSH margin, referred to your own five-point curve by speed, trim and viscosity correction: position against the best-efficiency flow, head and efficiency shortfall, minimum-flow flag.
USD 49 one-time purchase

What it does
Head, power and efficiency
Differential head from pressures, elevations and velocity heads; hydraulic and shaft power, pump and wire-to-water efficiency and kWh per m3.
NPSH margin
NPSH available against the NPSH required you enter, with margin, margin ratio and an OK, Caution or Alert level.
Your five-point curve
Head, efficiency and power fitted by a quadratic; best-efficiency flow, percent of BEP, preferred operating region and a minimum-flow flag.
Speed, trim and viscosity
Affinity-law correction for speed and impeller trim, and a viscosity correction aligned with the publicly documented Hydraulic Institute method.
Deviation from the curve
Head, efficiency and power shortfall at the equivalent flow, with an OK, Watch or Alert level.
Any liquid
Water from temperature with IAPWS-IF97, or your own density, vapour pressure and viscosity for any liquid.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model in about 100 recalculated runs: all 64 selector combinations, SI, US and British units, and 31 edge and invalid-input cases; 0 formula errors in LibreOffice. |
| Free version | Try the free pump head, power and efficiency calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Water Treatment, Utilities and Energy Made Simple