Performance of a sedimenting centrifuge by sigma theory: enter the feed flow and solids content, the particle and liquid densities, the liquid viscosity, the particle size to capture and the bowl geometry and speed, and see the settling velocity, the g-force, the Sigma value, the capacity, the cut size and the mass balance.
USD 49 one-time purchase

What it does
Stokes settling velocity under
Stokes settling velocity under gravity and in the bowl, relative centrifugal force at the inner and outer radius, peripheral speed, and the particle Reynolds number with a check of the Stokes-law limit.
Sigma (equivalent settling area)
Sigma (equivalent settling area) for a tubular bowl, a disc stack and a decanter from geometry and speed, or a Sigma value you enter from the maker or a test.
Theoretical capacity Q =
Theoretical capacity Q = 2 vg Σ and the capacity with your own efficiency factor; Q/Σ at the feed flow.
Rating basis
feed flow as a share of the capacity and the cut size (50 % captured) at the feed flow.
Sizing basis
Sigma required for the feed flow and the particle size wanted, machines in parallel, and the speed at which one machine would reach it.
Scale-up from a test
Scale-up from a test or pilot machine at equal Q/Σ, with an efficiency ratio.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model in 242 recalculated runs: all 64 selector combinations, SI, US, British and alternative units on four cases, result-unit switching and 158 edge and invalid-input cases; about 5,000 values compared, 0 formula errors in LibreOffice. The tubular-bowl and disc-stack Sigma formulas were also confirmed by numerical integration. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |