Home › Shop › CIP and SIP Steam, Water and Chemical Consumption
Excel tool

CIP and SIP Steam, Water and Chemical Consumption

Flow and turbulence check, water, chemicals and steam per step, SIP heat-up and hold, cycle time and cost for up to 8 clean-in-place circuits.

Water, chemicals, steam, heat loss, cycle time and cost of a clean-in-place (CIP) cycle, and of an optional steam-in-place (SIP) sterilisation, for up to eight circuits cleaned one after the other. Enter each circuit (pipe diameter and length, vessel volume, target velocity, metal mass), the five-step sequence (pre-rinse, caustic, intermediate rinse, acid, final rinse) with its times and temperatures, the chemical concentrations and stock strengths, the water, steam and ambient conditions, the recovery assumptions and your prices, and read the result for every circuit, every step and the whole cycle.

USD 39 one-time purchase

  • Excel workbook (.xlsx), no macros, version v1.0
  • Excel 2010 or later, Windows and Mac
  • Instant download after payment; updates to this major version included
  • Single-user licence; team and site options
  • Refund if it does not work as described or has an error we cannot fix: contact support within 14 days of purchase — full refund policy
CIP and SIP Steam, Water and Chemical Consumption — sample pages

What it does

Water and effluent per

Water and effluent per step and in total: once-through rinses at the circuit flow, recirculated caustic and acid from the pipe volume plus vessel hold-up plus CIP tank working volume.

Chemicals

active caustic and acid, and the stock quantity at the strength you dose, per step and per cycle.

Steam-in-place

the heat-up steam (metal, residual water, heat loss, the steam that fills the equipment, and vent/bleed), the hold steam (heat loss as condensate plus bleed), and the cycle time.

Cost per cycle and

Cost per cycle and per year for water, effluent, caustic, acid, CIP steam and SIP steam, in your currency.

Single-use against recovery

the water, chemical, steam and cost saved by recovering the caustic and acid and reusing the final rinse, at the loss and reuse shares you enter.

Water and steam properties

Water and steam properties from the IAPWS-IF97 formulation. Selectors for solution handling, steam basis, heat-loss basis and SIP; rows you do not need disappear; Default/Manual on the secondary inputs.

Built for engineers

  • Visible formulas — nothing hidden, so you can check every step.
  • Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
  • Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
  • Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.

For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.

Preview the workbook

An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].

CIP and SIP Steam, Water and Chemical Consumption Excel workbook sample pages
Layout illustration (not a results screenshot).

Specification and checks

FormatExcel workbook (.xlsx), no macros
Versionv1.0
Works inExcel 2010 or later, Windows and Mac
UnitsSI, US and British, mixed freely
IncludesGuide tab with method and references, calculator, print-ready report
Checked againstChecked against an independent Python model (IAPWS-IF97 properties from a separate library, its own heat-loss and viscosity code) over the default case, all 16 selector combinations, SI/US/British unit variants, result-unit switching and a set of edge and invalid cases: 0 formula errors in LibreOffice, results identical.
Free versionBrowse the free calculators

Compatibility, licence and support

FileExcel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise.
LicenceSingle user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms.
UpdatesUpdates to this major version are included; download them again from the link in your receipt.
SupportEmail [email protected] with your order number — questions on the method, your inputs or your results are welcome.
RefundsIf the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy.