Dryer water balance, humidity and heat balance: water evaporated, air flow, heater duty split into evaporation, product heating, exhaust and shell losses, thermal efficiency, specific energy per kg of water, exhaust dew-point margin and shell velocity, for direct and indirect dryers with steam, gas or electric heat.
USD 49 one-time purchase

What it does
Moisture balance
Dry solids, water in the feed, water evaporated and product rate on a wet or dry basis.
Humidity balance
Psychrometric functions for humidity ratio, enthalpy, wet bulb and dew point, with ambient air from relative humidity, wet bulb or dew point.
Air side three ways
Air flow from the temperatures, exhaust temperature from the air flow, or air flow and inlet temperature from the exhaust condition.
Where the heat goes
Evaporation, product heating, exhaust and shell losses, with a closure check against the heater duty, for steam, gas or electric heat.
Efficiency and specific energy
Thermal and overall efficiency, energy per kg of water evaporated and specific moisture extraction rate.
Exhaust dew-point margin
Exhaust humidity and dew point with a condensation warning, a shell velocity and residence time estimate, and what-if tables.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model: the workbook was recalculated and compared with it in 228 runs: the default case, all 90 combinations of the dryer type, air side, heat source and humidity and moisture basis selectors, 27 unit-system variants with every input and result unit switched, 38 valid edge cases and 72 blocked or invalid-input cases (blank, zero, negative, text and impossible inputs give a clear message and blank results, never an error value). 14,265 values compared, worst relative difference 2.1e-11, 0 formula errors. |
| Free version | Try the free humid air psychrometric calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Water Treatment, Utilities and Energy Made Simple