Size a liquid or gas filter and follow its pressure drop: area and units from a flux limit, clean and cake pressure drop, constant rate or pressure, time to the limit, cycle capacity, wash and backwash, and a change-out trigger from your readings.
USD 39 one-time purchase

What it does
Area and number of units
Filter area from your flux or face-velocity limit, and the number of units rounded up, or your installed number.
Clean pressure drop
From Darcy medium data, or one clean point on the maker's curve scaled with flow and viscosity.
Cake pressure drop
From specific cake resistance, solids concentration, density and porosity, for constant-rate or constant-pressure filtration.
Time to the limit
Filtration time to the pressure drop limit, terminal flux, dirt capacity or your maximum time, with the one that governs named.
Cycle capacity
Filtrate and solids per cycle, cake thickness, wash and backwash volumes, cycle time and units for continuous service.
Change-out trigger
Up to six differential-pressure readings with a trend, an alert level and the time left before the limit.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model that integrates the filtration equations numerically (the workbook uses the closed forms): the default case, every combination of service, filter type, filtration mode and clean-pressure-drop basis, SI, US and British unit variants with every input and result unit switched, and edge cases (blank, zero, negative, text and invalid inputs give a clear message and blank results, never an error value). |
| Free version | Try the free pipe pressure drop calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Water Treatment, Utilities and Energy Made Simple