Flare header Mach numbers, back pressure at the relief valves, radiation distance, tip velocity, purge and knockout drum liquid for up to 8 relief scenarios.
USD 49 one-time purchase

What it does
Up to 8 relief scenarios
Each with its own rate, molar mass, temperature, specific heat ratio, set pressure, tie-in segment and liquid carry-over.
Header hydraulics
Up to 6 segments and the flare tip, adiabatic or isothermal flow with friction, choked flow detected at any element.
Mach number and velocity
At the outlet of every element for the highest load, the highest back pressure ratio or a scenario you choose.
Back pressure at each valve
Built-up back pressure against the allowable percentage of set pressure for all scenarios at once.
Radiation at distance
The published point-source model from the heat release, with transmissivity entered or estimated.
Tip, purge and knockout drum
Tip exit velocity and Mach number, minimum purge gas rate, and knockout drum liquid by scenario against the volume available.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model (separate root-finding and closed-form radiation code) in 125 recalculated runs: the default case, all 24 selector combinations on two data sets, SI, US, British and industry unit sets (identical to 1e-13), the displayed result units, 67 edge and invalid-input cases, about 18,800 values compared (largest relative difference 5e-11); 0 formula errors in LibreOffice. |
| Free version | Try the free fire case relief load calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Safety Valves, Control Valves and Flare Made Simple