Gas pipeline hydraulics in Excel: outlet pressure by segment from the general flow equation (Colebrook) or Weymouth and Panhandle forms, Z from your value or Papay, velocity against erosional velocity, capacity to a target pressure and line pack.
USD 39 one-time purchase

What it does
Outlet pressure by segment
Pressure after every segment and for the whole line, total drop, pressure ratio and average gradient.
Four flow equations
The general flow equation with Colebrook friction, or the Weymouth and Panhandle forms.
Compressibility
Your own Z, or the Papay correlation at the mean pressure of each segment from a mixture table or your pseudo-critical data.
Erosional velocity check
Gas velocity at both ends of every segment against the erosional velocity, with your own C factor.
Capacity
The flow the line carries down to a target outlet pressure, for all four equations side by side.
Line pack
Mass and standard volume of gas stored in the line, plus flow, inlet pressure and diameter what-ifs.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model that solves every segment to convergence: the default case, every combination of gas basis, compressibility basis and equation, one to five segments, SI, US and British unit variants with every input and result unit switched, and edge cases (blank, zero, negative, text and infeasible inputs give a clear message and blank results, never an error value). |
| Free version | Try the free gas pipeline pressure drop calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Water Treatment, Utilities and Energy Made Simple