Recoverable heat of a gas turbine exhaust to the stack limit: steam, hot water or thermal oil with pinch and approach, supplementary firing, dew point limit, heat rate and plant efficiency effect.
USD 49 one-time purchase

What it does
Heat in the exhaust
Sensible heat above a reference temperature from exhaust flow, temperature and composition, with temperature-dependent gas heat capacities.
Exhaust two ways
A generic natural-gas turbine exhaust you can edit, or the fuel analysis with fuel and air flow, from which the tool burns the fuel and gives the exhaust.
Stack limit
An allowable stack temperature, the water dew point plus a margin, or the higher of the two; enter your own acid dew point for sulphur-bearing fuel.
Steam, hot water or thermal oil
Recoverable heat and the heat actually recovered by your target, with pinch, approach, blowdown and IAPWS-IF97 steam properties.
Supplementary firing
Gas temperature after a duct burner, extra heat and steam, burner fuel flow, incremental efficiency and an oxygen check.
Plant efficiency effect
Fuel utilisation, effective electrical efficiency and heat rate, power-to-heat ratio, and what-if tables for stack limits and firing duties.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model (IAPWS-IF97 reference implementation for the water properties, gas enthalpy integrated separately from the fluid data): all 36 combinations of the four method selectors, unit-system variants with every input and result unit switched, and edge cases (blank, zero, negative, text and invalid inputs give a clear message and blank results, never an error value). |
| Free version | Try the free steam tables calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Gas Turbines, HRSG and Compressors Made Simple