Correct gas turbine output, heat rate and exhaust temperature to ISO or site reference conditions: correction curves or exponents, expected output at site, degradation estimate and a 12-point trend.
USD 49 one-time purchase

What it does
Readings you already have
Ambient temperature, barometric pressure or altitude, humidity, inlet and exhaust losses, measured output, heat rate and exhaust temperature.
Correction curves or exponents
Type your maker's correction curves (5 to 8 points each, extrapolation flagged), or use simple exponents and sensitivities with generic defaults.
Corrected performance
Multiplicative corrections aligned with the publicly documented ASME PTC 22 and ISO 2314 method: corrected output, heat rate, efficiency and exhaust temperature.
Expected output at site
Output and heat rate expected at today's conditions, and the deviation of your test from it as a degradation estimate.
12-point trend
Up to 12 more test points, each with its own conditions, with mean and largest degradation and the change from first to last.
Selectors and report
Correction method, heating value basis, site pressure input and reference conditions, with ranked findings, three charts and a print-ready report.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model (curve interpolation by scipy, humidity by mole-fraction mixing) in about 210 recalculated runs: all 24 selector combinations on two data sets, SI, US, British, metric-industrial and mixed unit systems (identical results), result unit switching and 72 edge and invalid-input cases, about 20,000 values compared; largest deviation 6e-14 relative (6e-7 where the independent unit constants differ in the seventh digit); 0 formula errors in LibreOffice. |
| Free tools | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Gas Turbines, HRSG and Compressors Made Simple