A design-side screening and sizing estimate for natural gas sweetening: enter the sour gas flow, pressure, temperature and H2S and CO2 content, the treated gas targets, the solvent type, strength and loadings, the absorber tray data and the regeneration conditions, and see the acid gas partial pressures, a neutral screening position among the main process routes, the amine circulation, the absorber diameter, the regeneration duties and steam, the lean amine pump power, and the acid gas and sulphur sent to sulphur recovery.
USD 49 one-time purchase

What it does
Acid gas partial pressures
Acid gas partial pressures of H2S, CO2 and their sum in the sour gas and the treated gas, and the feed and treated gas acid gas concentrations to locate the case on a published process selection chart.
Lean amine pump hydraulic
Lean amine pump hydraulic and shaft power.
Selectors for the solvent
Selectors for the solvent type, the gas flow basis (standard volume or mass) and the energy estimate basis; rows you do not need disappear; Default/Manual on the secondary inputs.
Ranked findings, three charts
Ranked findings, three charts (acid gas partial pressure map, circulation against rich loading, heat duties and pump power) and a print-ready report. SI, US and other units, switchable on every row; typical-range checks on every input.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model (IAPWS-IF97 properties from a separate library) in 223 recalculated runs: all 16 selector combinations, SI, US, British and industry units on three cases, result-unit switching, 54 valid edge cases and 135 invalid-input cases; about 5,600 values compared, 0 mismatches, 0 formula errors in LibreOffice. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |