Energy accounting for single- and twin-screw polymer extruders: enter the throughput, screw speed, main motor reading, heater power, barrel cooling, auxiliary power, feed and melt temperatures and your polymer data for up to 6 operating cases or grades, and compare them side by side.
USD 39 one-time purchase

What it does
Power through the drive chain
electrical input, motor shaft and screw shaft power, and the drive losses, from whichever reading you have: electrical power, motor shaft power or screw torque as % of rated.
Motor load (% of
Motor load (% of rated power), screw torque in N·m and as % of the rated torque.
Specific mechanical energy (SME)
Specific mechanical energy (SME), specific heater, auxiliary and total energy per kg, on the electrical-input basis or the screw-shaft basis.
Polymer enthalpy rise from
Polymer enthalpy rise from solid and melt specific heats, melting (or glass transition) temperature and heat of fusion, or your own enthalpy value; the theoretical energy requirement and the energy efficiency of each case.
Heater and barrel-cooling shares
Heater and barrel-cooling shares and the energy balance residual (heat losses and unaccounted energy), with findings when the cooling fights the screw shear or the readings do not balance.
Energy cost and carbon
Energy cost and carbon dioxide per tonne and per year from your electricity price, emission factor and operating hours.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model in 153 recalculated runs: all 72 selector combinations, SI, US, British and alternative units, random cases and 59 edge and invalid-input cases; 38,668 values compared, 0 mismatches, 0 formula errors in LibreOffice. Invalid inputs give a clear message and blank results, never an error value. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |