Screening tool for a free-radical polymerization reactor run as a batch, a semi-batch with monomer fed over time, or a continuous stirred tank: first-order monomer consumption with your own Arrhenius kinetics, conversion against time, polymer production and solids content, heat release, and cooling by a jacket, an internal coil or a reflux condenser with your U and area.
USD 49 one-time purchase

What it does
Conversion against time from
Conversion against time from your apparent rate constant and activation energy: batch, semi-batch (monomer hold-up during the feed and the hold, solved in closed form) and continuous stirred tank (conversion from the residence time).
Polymer per batch and
Polymer per batch and per hour (with the turnaround time), solids content at the end, fill check against the working volume.
Heat release from your
Heat release from your heat of polymerization, with a peak factor for the gel effect, plus agitator heat and the heat taken up by a cold feed; the peak net duty found over the whole run (including the moment the feed stops).
U at the start
U at the start and at the peak duty: the process-side film falls as the viscosity rises with conversion (exponent derived from the published agitated-vessel correlation, editable), with U entered or built from films, wall and fouling.
Heat removal capacity, margin
Heat removal capacity, margin at the peak duty and lowest margin over the run, capacity at unlimited coolant flow, coolant outlet temperature, coolant flow needed at your allowable outlet temperature, reflux boil-up rate.
Semi-batch
the largest feed flow the cooling can follow.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model (numerical integration of the semi-batch balance, separate root finder for the feed limit) in 249 recalculated runs: the default case, all 18 selector combinations on two data sets, SI, US, British and industry unit sets, and edge and invalid-input cases, with every chart point compared; 0 formula errors in LibreOffice. The methods were checked against Perry's Chemical Engineers' Handbook (7th ed.) and Shah and Sekulić, Fundamentals of Heat Exchanger Design; the Guide lists each equation with its source and page. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |