Size relief valves for gas, steam and liquid: up to six relief cases, required area, orifice D to T, rated capacity check and overpressure what-if, aligned with the publicly documented API 520 Part I method.
USD 49 one-time purchase

What it does
Gas and vapour
Critical or subcritical flow chosen from the back-pressure ratio, with the flow coefficient from k, compressibility and molar mass.
Steam
Napier form with the high-pressure correction Kn and the superheat correction Ksh from IAPWS-IF97 steam volumes, or your own value.
Liquid
Viscosity correction found by repeating the Reynolds-number step until it settles, with Kw for balanced valves.
Up to six relief cases
Set pressure, overpressure, back pressure and every correction factor shown; the governing case and orifice letter are named, aligned with the publicly documented API 520 Part I method.
Rated capacity check
Capacity of the selected orifice for every case and the share of the area each case uses, with automatic or chosen orifice letter.
Overpressure what-if
The governing case at five other overpressures, with ranked findings such as back pressure too high for the valve type.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model: all 24 combinations of the selectors, 18 unit-system variants (SI, US customary and British) and 26 edge-case runs (blank, zero, negative, text and invalid inputs give a clear message and blank results, never an error value). Results agree within 1e-10 relative. |
| Free version | Try the free relief valve (PSV) sizing calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Safety Valves, Control Valves and Flare Made Simple