Refrigeration cooling load of a cold room or process enclosure: product cooling (chilling, freezing, sub-cooling, respiration), wall transmission from insulation thickness, door infiltration and internal loads in a 24 hour profile, with peak, average and design load in kW and TR, compressor power, condenser heat and brine flow.
USD 39 one-time purchase

What it does
Product load
Up to 4 products: chilling, freezing, sub-cooling and optional respiration heat, with each product's share.
Transmission
Up to 4 surfaces from insulation thickness and conductivity, with film coefficients and an outside temperature per surface.
Doors and infiltration
Door openings by a published doorway exchange-flow method with humidity, passages and open time, plus air changes for other leakage.
Internal loads
People, lighting, motors, evaporator fans and defrost heat, each over its own hours.
24-hour profile
Peak hour, average load and load factor, and the plant capacity for your compressor run hours, in kW and TR.
Compressor and brine
Indicative compressor power and condenser heat from your COP or a Carnot fraction, and the chilled water or brine flow.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model: the workbook was recalculated and compared with it in 153 runs: the default case, all 24 combinations of the selectors, 20 unit-system variants with every input and result unit switched, 29 valid edge cases and 79 blocked or invalid-input cases (blank, zero, negative, text and impossible inputs give a clear message and blank results, never an error value). 6,364 values compared, worst relative difference 1.9e-11, 0 formula errors. |
| Free version | Try the free humid air psychrometric calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |