Build the full water, chemical and energy balance of a batch (exhaust) dyeing process — pre-treatment, dyeing, rinses, soaping and finishing — one bath at a time. Enter the fabric mass, the liquor the wet fabric carries over, and for each step its liquor ratio, temperature and recipe (dye, salt, alkali and auxiliaries, in % on weight of fabric or g/L), and read the water, chemicals, steam and effluent per bath and for the whole batch.
USD 39 one-time purchase

What it does
Fresh water and effluent
Fresh water and effluent per step and per batch, and the specific water consumption in litres per kg of fabric (the same as m³ per tonne) — the headline dyehouse benchmark.
Chemical quantities per step
Chemical quantities per step and totals: dye, salt and alkali loads, auxiliaries, and chemicals per kg of fabric.
Steam and heat to
Steam and heat to raise each bath, by indirect coil or direct steam injection, with the steam saturation temperature, enthalpy and latent heat from IAPWS-IF97; specific steam per kg of fabric.
Effluent COD and TDS
Effluent COD and TDS load and concentration from factors you enter, with the dissolved load carried from bath to bath by the wet fabric, so a rinse removes it gradually.
Dye exhaustion and fixation
the unfixed dye that reaches the effluent (colour and COD) and the small amount carried away on the fabric.
What-if
a lower liquor ratio (as on a low-ratio machine) and reuse of chosen rinse drains — the water, steam and chemicals saved per batch and per year, valued at your own water, steam and effluent prices.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, with the book, edition and page named in the Guide tab.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | Checked against an independent Python model in 150 recalculated runs: all recipe-basis and heating combinations, 1 to 10 steps, SI, US, British and alternative units, result-unit switching and more than 100 edge and invalid-input cases; about 3,800 values compared, 0 formula errors in LibreOffice. The steam properties were cross-checked against an independent IAPWS-IF97 library. |
| Free version | Browse the free calculators |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |