Pollutant loads through the primary, biological and tertiary stages, equalisation volume, activated sludge balance, oxygen demand, air flow and blower power, clarifier loading and a discharge limit check, for conventional or extended aeration.
USD 39 one-time purchase

What it does
Loads through the plant
BOD5, COD, TSS, TKN and total phosphorus in kg/d at the raw, primary, biological and final effluent points, with removal per stage.
Equalisation volume
Volume for a diurnal flow cycle, with the peak factor before and after equalisation.
Activated sludge balance
Sludge production, aeration volume, F/M ratio and sludge age for conventional or extended aeration.
Oxygen and blower power
Carbonaceous and nitrogenous oxygen demand, standard oxygen transfer rate, air flow and blower power.
Clarifier loading
Surface overflow and solids loading rates at average and peak flow against your limits, and the area needed.
Discharge limit check
Margin on each effluent parameter, plus what-if tables for sludge age and wastewater temperature.
Built for engineers
- Visible formulas — nothing hidden, so you can check every step.
- Fully referenced — methods from the standard references, checked against their published worked examples.
- Safe to share — sheets are protected against accidental edits, with an open password so you can still customise.
- Built-in input checks — clear warnings for impossible inputs and values outside typical ranges.
For engineering estimates; verify against site data. Code-based methods are aligned with the publicly documented procedure; they are not a licensed reproduction or a certification.
Preview the workbook
An illustration of the sheet layout of this workbook, not a screenshot of calculated results. Select the image to enlarge it. For questions before you buy, email [email protected].
Specification and checks
| Format | Excel workbook (.xlsx), no macros |
| Version | v1.0 |
| Works in | Excel 2010 or later, Windows and Mac |
| Units | SI, US and British, mixed freely |
| Includes | Guide tab with method and references, calculator, print-ready report |
| Checked against | An independent Python model: all 12 combinations of the three selectors, unit-system variants with every unit option switched, 32 valid edge cases and 36 invalid-input cases (blank, zero, negative, text and out-of-range inputs give a clear message and blank results, never an error value). Results agree within 1e-14 relative. |
| Free version | Try the free chemical dosing rate calculator |
Compatibility, licence and support
| File | Excel workbook (.xlsx), no macros, version v1.0; works in Excel 2010 or later on Windows and Mac. Sheets are protected against accidental edits, with an open password so you can customise. |
| Licence | Single user. A team licence (up to 5 named users) is 3 × the shop price; site licences on request — licence terms. |
| Updates | Updates to this major version are included; download them again from the link in your receipt. |
| Support | Email [email protected] with your order number — questions on the method, your inputs or your results are welcome. |
| Refunds | If the tool does not work as described, or has an error we cannot fix, email [email protected] with your order number within 14 days of purchase and we will refund you in full. Refunds are not offered for a change of mind once a file has been downloaded. Read the full refund policy. |
Field guide: Water Treatment, Utilities and Energy Made Simple