Residence time and hold-up
Liquid residence time at normal level, hold-up between low and high level and drain-down times for drums and vessels, plug-flow time in pipes, and the volume a target time needs.
Inputs
Results
Join PlantCalcKit — free
Be first to hear about new calculators, Excel tools and field guides — one short email when something new is ready. The calculators stay free with or without an account.
By joining you agree to our privacy policy. Unsubscribe or delete your details any time.
You are a PlantCalcKit member
Signed in as . We will email you when new tools and guides are ready.
How this calculator works
Residence time is the liquid volume held divided by the flow through it: τ = V / Q. For a drum or vessel the calculator works out the liquid volume at the low, normal and high levels from the vessel shape, then gives the residence time at the normal level, the hold-up time between low and high level, and how long the level takes to move from normal to low if the inflow stops (or from normal to high if the outflow stops) at the same flow. For a pipe it gives the plug-flow time τ = L / v. For a reactor or tank of known volume it gives the space time on the working volume and the liquid space velocity Q/V.
With a target residence time it also gives the volume needed (V = Q·τ), and for a vessel the level that holds it; for a pipe, the length needed at that diameter.
Example: a horizontal drum 2 m in diameter and 6 m between tangents with 2:1 heads, 20 m³/h of liquid, levels at 0.4 / 1.0 / 1.6 m. The drum holds 20.94 m³; at the normal level (half full) it holds 10.47 m³, so the residence time is 31.4 min. The hold-up between low and high level is 15.14 m³, or 45.4 min, and the level falls from normal to low in 22.7 min if the feed stops. A 10 min target needs 3.33 m³, held at a level of 0.44 m. A 500 m run of 6" Sch 40 pipe (154.1 mm ID) at the same flow holds 9.33 m³: 28.0 min at 0.30 m/s.
Method and limits
Partial volumes use the same engine as the tank and vessel volume calculator (Perry's §10 partial-volume equations; exact 2:1 ellipsoidal and hemispherical heads, torispherical heads integrated through crown and knuckle). Inside dimensions, ideal shapes; nozzles, internals, coils, boots and vortex breakers are not counted. The residence time is a mean value at steady flow: it does not describe mixing, short-circuiting or the residence-time distribution, and in laminar pipe flow the centreline fluid passes in half the mean time. Q must be the actual volumetric flow at the conditions in the equipment. Required hold-up and surge times come from your company's level-setting practice and the equipment duty — this calculator does not choose them.
Sources
- Perry's Chemical Engineers' Handbook, Section 10 — partial volumes of horizontal and vertical vessels and heads (method of the PlantCalcKit tank volume engine).
- O. Levenspiel, Chemical Reaction Engineering, 3rd ed., Wiley (1999), Ch. 5 — space time τ = V/v₀ and space velocity.
- C. Branan, Rules of Thumb for Chemical Engineers, 3rd ed., "Separators/Accumulators" — liquid residence and surge time practice for drums.